Polyurethane Varnish (Oil based)

Solvent based product 30 % dilution with turpentine is recommended while applying on paintings to prevent yellowing effect. Drying Time: 4-6 hours Coverage: 12 square meters per liter Application: Brush, Spray Lead Free product Bluebird Polyurethane high-solids interior and exterior varnish is an easy-to-apply single component formula that provides a long-lasting finish that is highly resistant to scratches, abrasion, water, food stains, grease and detergents. Increases brightness and color saturation Adjusts and unifies surface sheen Improves surface durability – ideal when shipping or exhibiting Protects colors from UV light damage Resists discoloration – yellowing and fogging – caused by humidity, heat and UV Semi-opaque when wet, transparent when dry Use on flexible or rigid supports Designed for interior and exterior use Usage: As this is permanent, do a patch test first Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness) Ensure your space is well ventilated and dirt and dust-free Place the artwork flat on a surface – always varnish horizontally Use long, even strokes, covering the surface top to bottom while moving from one side to the other – don’t go over bits you have missed, but leave to dry and then re-varnish area Apply up to three thin coats, allowing at least three hours dry time between coats Avoid: Don’t apply in one thick coat, but several thin coats, to avoid drips and cloudiness Don’t go back over areas you have already done, as this can cause clouding Don’t attempt to remove once applied